Spent a half day Sat and most of the day Sun removing the 2nd subframe bolt. Now both back bolts under the seats are removed:
Then I started on the firewall brackets. Used the Plasma cutter to enlarge the holes and worked on removing the cage that holds the nut. I didn’t get the cage removed, but think I have it out of my way for now:
Passenger side:
Drivers Side:
The plan for next weekend is to use the grinder to grind down the nut enough so I can remove it. My cut-off tool is to big to fit, but I think I can get the grinder in. Should take about a day per side to remove each nut.