Been busy prepping and painting the body jig. First, I sanded off the weld-thru primer that was left over, then cleaned the metal with Eastwood Metal Wash, then used Prep Step and finally painted with 2 coats of Zero-Rust.
Here are the two 11′ pieces of 2×2:
Here are the T pieces of 18″ 2×2 welded to 6″ 2.5×2.5 pieces:
Here are the 2 6′ pieces of 2×2
I still have more pieces to clean and prep for painting, but needed to order more Zero-Rust and will need to wait for that to arrive to finish painting the parts of the Jig.