Also assembled my engine cart in preparing for the new 496 Stroker I should be getting in the next week or two.
//ADD YOUR PLAIN HTML CODE HERE
I had some remaining work from the floor patch panel from last summer. I had to get the old brake bracket off the old floor – will need to weld it to the new floor later.
Here is the bracket on the old floor:
I started by drilling out the spot welds I could find:
Then I used a body saw to cut it out with the old floor metal still on it:
Then I used my vice to hold it while I worked on getting the old metal off of it:
This body seam buster came in real handy:
You can see some of the spot welds I had missed:
Used my grinder to smooth the old spot welds down: Will put this in the blast cabinet and prime it before welding to the new floor.