Patch Panel

Wrapped up my cleaning and organizing of the garage, shed, and 2nd floor of garage.  Now focusing on re-welding a few sections of my prior floor patch work.  Before I welded from the inside of the car, and now I plan on going from the outside (bottom) of the floor while it is on the rotisserie.  Today was cleaning and grinding the welded sections both on the inside and inside, then cleaned.  Taking next Thu & Fri off, so hope to be done with my re-welding by the end of next weekend.  The side close to the trans hump area was difficult to get the welding nozzle at, going from the bottom, should provide me with easier access to the areas I want to re-weld.

Inside shot:

IMG_1570

Bottom of floor shot:IMG_1569