Camaro 4-09-2017 – e-brake bracket April 9, 2017 Doug Leave a comment Finally gout around to drilling out the hole for the e-brake bracket: Still need to file down the edges and spray with some epoxy.
Camaro 4-09-2017 – Inner quarters \ trunk April 9, 2017 Doug 2 Comments Also worked on the inside quarters in the trunk – there was some undercoating in spots I needed to remove. After Dremel: Before: Then used some paint thinner for the remaining gunk:
Camaro 4-09-2017 – Inner Fender April 9, 2017 Doug Leave a comment So one more round of welding and grinding. I will have these re-blasted & sprayed with epoxy then use a little filler to smooth out the gaps and call it good. There was also a small bend I needed to hammer out – before: After: