Tag Archives: 1st-Epoxy-Priming

Ventilator – 6/26/2015

This is what I am thinking on how to set up the ventilator…  I will have a filter at each end of the hose and support the host after it leaves the garage.  I will also divide the garage in half and place a plastic sheet down the middle of the garage to try to keep fumes in the back half and let the ventilator handle the fumes.
IMG_1503
IMG_1504IMG_1505

Ventilator – 6/23/2015

Bought a used Harbor Freight Ventilator from e-bay and also a couple of ducts.  I plan on taking next week off from work to try to get the car primed on the 5th.  Will use this to remove the fumes from the garage adding some filters to both ends.  Getting the ducts stretched out before setting it up.  I will place a duct at each end of the ventilator and place the duct out of a window with a cardboard frame.

IMG_1496 IMG_1495