Finished sanding the other door edges… Start priming door tomorrow…

Worked on the door edges and outside of other door… Getting them ready to prime…

After taking last night off, wrapped up the edges of the fenders and did the outside of one door (still need to do edges)…

Got the other fender sanded tonight… This was the new one from AMD – the black EDP coating was much easier to remove.

Worked on stripping the drivers side fender… Still have a little to do on the edges.

A little sanding to catch the flash-rust to prepare for priming this weekend… Taking tomorrow (Fri) off from garage work…

More sanding tonight – lower nose before…

Lower nose after…

Back at it tonight… Got the upper front nose panel sanded and ready to prime.

Other half of roof and passenger side quarter panel are now complete. My arms are like Jelly! One more day of sanding tomorrow… Notice the mess on the floor that will have to be cleaned-up!

Relocated my hose & reel for the new piping setup and so I could run my air tools today.

A lot less water in my lines with the new setup… Got a quarter panel stripped and half of the roof sanded to bare metal. Took me most of the day to do. I took today and tomorrow off to work on the car.