Got some garage time in between other projects this weekend… Started out welding the angle brackets (there is a square top plate with a hole drilled in it):
Then welded the angle brackets to some 2×2 square tubing. Notice each piece can be attached to the car in three different spots. These are what will attach to the car:
Then I took the nuts and threaded them on the bolts and placed them in the holes to tack the nuts in to place removing the bolts afterwards:
One side is done for this batch:
2nd side is done for this batch:
Next I need to weld some 2×2 tubing to the 2.5×2.5 tube that I prepped below: